07-30-2009, 02:42 PM
|
 |
Proprietor
|
|
Join Date: Nov 2008
Posts: 2,238
|
|
KB18307 - What are the PBX requirements for BlackBerry MVS version 4.6
KB18307 - What are the PBX requirements for BlackBerry Mobile Voice System version 4.6
Environment
- BlackBerry® Mobile Voice System version 4.6
- BlackBerry® smartphones
Overview
The Private Branch Exchange (PBX) requirements for BlackBerry MVS version 4.6 include the following:
PBX hardware
- Digital Signal 1 (DS1) card that Supports T1/E1 Integrated Services Digital Network Primary Rate Interface (ISDN-PRI)
- CAT5e cable or better to connect trunk lines
Note: If multiple spans are used, each span must have connection points to connect the PBX to the media gateway.
PBX licensing
- Capacity and licensing for ISDN, trunks, stations, and Q Signaling (QSIG)
PRI provisioning
PRI provisioning support for the following:
- ISDN-PRI interface
- B8ZS/ESF DS1 signaling that can transmit at 1.544 Mbps for T1 carriers or HDB3 DS1 signaling that can transmit at 2.048 Mbps for E1 carriers
- Two-way B-channels
- One D-channel for each T1/E1 span
Note: Non-Facility Associated Signaling (NFAS) is not supported.
- Trunk-to-trunk transfer or tandem switching
- QSIG
Caller ID
- PBX that is capable of sending and receiving a caller ID of up to 14 digits
- PSTN trunks (local, long distance, and international) that are capable of sending and receiving a caller ID of up to 14 digits
Note: Re-provision of the organization's PRI spans might be required.
DID
- One Direct Inward Dial (DID) per user
- Five DID numbers per 100 users for ANI and DNIS pool numbers
- One DID for the BlackBerry MVS command number
- One DID number for the mobile access number
__________________
http://blog.port3101.org/hdawg/
The views expressed by me on Port3101 and its affiliated sites are my own and do not necessarily reflect the views of my employer.
|
Linear Mode
